Sceptre E465BV-FHDD 46" 3D LED TV 1920x1080, 60 HZ, HDTV, 3D "unplug tv work" Questions

tv powered on. This was simply a case of trial and success! (3) Nateinportland said : unplug, hold power button, plug in. If that doesn't work, unplug all the HDMI cables, unplug the power, hold power

...TV-unplug it and let it sit as indicated in the manual; then turn it back on. Another option: unplug the TV and use an air-can and thoroughly dust ALL the component input/output access points on the ...

...Tv will not turn on. Flashes 10 times. If we unplug/plug it basck in several times we can eventualy get it to work. Seems to be getting worse every day. You need to replace the power supply, PN: ...

...fine. If none of the buttons work except power u should reset your tv. Hold vol- on tv and menu button on remote. Then unplug tv. Everything will be resset. And your remote control will work

...when i plug it back in the remote will work until i turn o I've unplugged the tv and this only makes the remote work until the tv is turned off again. This problem has been answered a few while

...unplug it again. We unplugged the tv 3 times and all other channels were working but when we got to channel 9 every time the tv had no picture and remote or controls would not work. We finally turned ...

tv have same problem the menu stuck on and scrolling . the remote dose'nt work. have you replaced the battery and checked. the menu button on the top of the tv is sticking.I unplugged the cable to the

...unplug satelite tv (STB) connection, you should check you STB. If still not working, try to unplug AC cord from power line. Wait until led display indicator off, that plug again. If it still not ...

...unplug the TV for a couple of days, then plug it back in, it should work. The tv will also do this whenever there is a power failure or if you unplug the tv to use the outlet for another device. Have ...