it says " warming up, please wait" I have replaced the fuser unit with a used one. could it still be the fuser unit? Yes it can be the used fuser. Kind of odd for it to be anything else but the fuser
Question about Panasonic Office Equipment & Supplies
...warming up then ready then warming up then ready ,and it cant copy are do anything. what could be wrong? The fuser is not coming to temperature. Probably bad temperature senor on fuser. Replace
Question about Xerox Office Equipment & Supplies
...Fuser module is warming up. Printing may be delayed". But the machine doesn't wait and warm up. We have tried to delay fixing the paper jam hoping the machine would warm up, but that didn't work. Any ...
...fuser code. Hi, From the Xerox Phaser 4500 Service Manual (here), the main problems could be one of: Warm-up failure - Fuser warm-up not complete within 110 seconds after starting. Cool-down error - ...
xerox 6121 mfp jam at fuser if it's in warranty engineer. Otherwise check at the back if there's any paper in the fuser, or a sensor in the wrong position. (Fuser get's warm.. for recognition)
module fails to warm up Hi Anonymous, I suspect your printer is quite new. I think your Fuser unit to be at fault. You need to order a new spare fuser unit from Xerox or investigate further. Good Luck
...able to handle it easily. If it will not go past warming up it is not warming up the fuser temp never gets to where it needs to for you to print That is why it doesn't come to a ready to print
xerox error u41000 That is a fuser not warming fault. Replace the fuser module.
...warming up) Srri but this is a fuser failure. The lamp has probably blown so it cannot generate any heat. best buy a new fuser unit. A lot of the machine has to come apart to fit it. You would be ...
6 questions posted
Usually answered in minutes!
237 Questions
232 Questions
180 Questions
101 Questions
105 Questions