Braun Novamat 330 Slide Projector "straight projector" Questions

how to adjust cycle solenoid fro Kodak autofocus 850 projector The cycle solenoid adjust is a pretty straight-forward adjustment. Check out the attached image.

How do you remove the carousel from the projector? You should be able to rotate the carousel to the zero mark and lift it straight off.

...projector, the metal piece goes down for a moment, and then goes immediately back up into place. I would think it's supposed to stay down. Please let me know if there is a fix for this. Yes, there is ...

...projector on & off quickly to locate the straight wire protruding out of the camstack hub. Turn the projector OFF & UNPLUG. Now look for the "J"-shaped wire that SHOULD make contact with the ...

where can I get magazines for ther Novamat 130 AF large Most camera stores sell Gepe Universal Straight Trays and some also have the LKM trays. You can also order Braun CS trays in the USA from: HP ...

projector upside down & remove the 4 screws & elevation foot that secure the bottom cover in place.  Near the center of the slide change mechanism is the clutch contacts (look for the hub

...projector, locate the clutch spring / clutch contact. The tip of the clutch spring (spring sticking straight out of the camstack hub) should be just visable over the clutch spring (the "L"-shaped ...

...projector to continuous cycle. You may be able to gently(!) bend the "J"-shaped contact so that it once again stops the straight contact that rotates 360 degrees per cycle. This is a risky (and ...

What type of bulb do I need tp get my Kindermann Magic 1500 AFS-IR working again? Thanks Contact: www.bulbman.com as a first try. They may not have the lamp, but they should be able to give you the ...

...straight , then moving forward or reverse at a 45 degree angle. The Slide Change mechanism needs to be re-built. The bad news is this projector was manufactured from 1976 to 1984. Kodak scrapped the ...