Alpine MRD-M1005 Car Audio Amplifier "a3000db" Questions

A3000DB Car Audio Amplifier: I hooked it up.It played for ten mins. Now no soun... I hooked it up.it played for ten mins. Now no sound output but not in protect. Burnt part inside no, check your ...

I have a power acoustik A3000DB 3000W Mono Class D Series Amplier The amp powers on but there is no sound. It does not go into protection.I tried installing it in another car to no prevail same ...

Power Acoustic A3000DB mono amp problems Recently the amplifier began smoking, white smoke but the amp did not cut off, when inspected the capacitors shown below burst. I myself replaced the ...

red light turns on then fades away look closer or close one eye and imagine it lights up (;

internal capacitors keep blowing up after replacements if it keeps blowing caps, then you must have another problem inside the amp. such as bad transistors or resistors for an example.

internal capacitors keep burning Had the amp approx. 1year from new, recently about 2weeks ago, internal capacitors burned but amp was still working, replaced capacitors but it occurred again. Want to

wat kind of wire should i use power acoustic 3000 class d mono block What does the fuse on the back say? AWG 4 has around a 60 amp capacity, AWG 2 is about 95 amps. I wouldn't suspect you would need ...

i have a 3000 watt power acoustik amp with 6 gauge wiring kit i hooked up everything correctly but the amp comes on in protection mode then switches to on but no sound ever comes from the speakers one

What's the best way to hook up PA3000DB to a Kicker 15' CVR to get the most bass possible.... Honestly, if you have to ask, you should have a pro do it for you. The few bucks you spend on installation

internal capacitor blown..replaced and amp stays in protection while fan runs..anything else maybe wrong..circuit board looks fine the romote lead may be touching metal