Goodman GMS90703BXA Heater "cleaning flame sensor" Questions

Ad

...flame sensor you will need some steel wool, turn off power to the furnace and remove the flame sensor and clean it with the steel wool. After cleaning reinstall it and turn power back on to

Ad

...flame sensor you will need some steel wool, turn off power to the furnace and remove the flame sensor and clean it with the steel wool. After cleaning reinstall it and turn power back on to

Ad

Question about Goodman Heating & Cooling

1 Answer

...flame sensor you will need some steel wool, turn off power to the furnace and remove the flame sensor and clean it with the steel wool. After cleaning reinstall it and turn power back on to

Question about Goodman Heating & Cooling

1 Answer

...flame..could a simple cleaning with sand paper fix issue? you will most likely break your flame sensor if you attempt cleaning it with sandpaper. Make sure the sensor is cool and remove it. Clean the ...

...flame sensor you will need some steel wool, turn off power to the furnace and remove the flame sensor and clean it with the steel wool. After cleaning reinstall it and turn power back on to

Question about Goodman Heating & Cooling

1 Answer

flame sensor is not sensing flame. Inspect the system as it is tying to start and see if the flames are traveling to all burners and hitting the sensor. If not, clean the burner flame rail (the trough

...back off, then you need to clean your flame sensor with light sand paper or steel wool. You might need a new flame sensor, but most of the time they can be cleaned an will work well after

...flame sensor. is it the igniton module or sensor? HELP!! Your flame sensor is measured in Millivolts not voltage. Is the flame spreading accross the burners at all? If it only ignites on one of the ...

Question about Heating & Cooling

1 Answer

...flame sensor issue? Yes the flame sensor is not allowing the ignitor to start, you will need to remove the flame sensor, and clean the black carbon build up from the stem of the flame sensor, replace ...

...flame but most of the time the problem is on the spade clip that attaches to the circuit board or to the bottom of the sensor itself. A simple removal and scratching/sanding/cleaning of the surfaces ...

Not finding what you are looking for?
Goodman GMS90703BXA Heater Logo

1,187 questions posted

Ask a Question

Usually answered in minutes!

Top Goodman Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a Goodman Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...