Apex Digital AT2702 27" TV "main board pcb" Questions

Ad

Question about Mitsubishi Televison & Video

1 Answer

...PCB-MAIN) D909 PT.# 264P521020 IC401 PT.# 272P174010 *** ( TO PREVENT REPEAT FAILURE , REMOVE T905 FROM PCB AND RE-SOLDER LEGS OF TRANSFORMER AND THEN REINSTALL) 2. POWER SUPPLY WONT RUN. CHECK FOR ...

Ad

Question about Televison & Video

1 Answer

...pcb.the way to check it requires a o-scope but the ir reciver is not sold seperate from the main pcb.the only way to repair is replace the board.shopjimmy.com has the board for less than

Ad

...board. but still same Problem.please give me correct part Main system control memory IC fault. Replace it with same number. If you wish to get some details; check the site linked here. Pull up older ...

...on my tv is jumping in and out. U have cold sholdier joint at the vidieo board connection pins or the crt yoke pins connection to the main pcb board.If u unlucky the video board ic is short or ...

Question about Sharp Televison & Video

1 Answer

...board has gone faulty. This is located on the bottom front of the tv behind the lens on the front. if the tv is in the prescence of a smokng environment sometimes the infra red led gets contaminated ...

Question about Broksonic Televison & Video

1 Answer

main board. It will be good to remove the power plug and check all the leads, the connectors and the PCB for signs of dry soldering. If so use a good iron and do the soldering of the suspected joints

...main colors of lime green and blood red? It may be worth doing some basic checks - look for a dry or fatigued solder joint on the blue video driver output circuit - look for a bad joint at any pcb ...

...BECOME ONLY ADOT IN THE MIDLE check the horizontal section of the TV. and re solder the pcb at the neck of the CRT, and the main board. check for any leak capacitor, oil discharge in circuit

Question about Prima Televison & Video

1 Answer

...main board, then you can do first with re soldering cold soldered component parts at video section which get loose contact to the pcb ( printed circuit board ).just let me know if it works good

...the CRT-(tv tube) YOKE wires R,G,B connections to the main PCB board?Resolders the video board CRT-(tv tube)video board pins sockets that connect the video board and the CRT-(tv tube)

Not finding what you are looking for?
Apex Digital AT2702 27" TV Logo

120 questions posted

Ask a Question

Usually answered in minutes!

Top Apex Digital Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Apex Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...