Power head and wand connection is intermittent. Tried to take the power head apart by removing the 3 screws on the one side of the power head. Was not able to pull the sections apart and since they ...
Question about Rainbow Vacuums
...power head PN-12 that does not come on. Switch and motor are good. Hi I've got a Rainbow e series vacuum with power head PN-12 that does not work. The vacuum works fine and another smaller power head ...
...from reaching the power head. If you have checked all of the wiring and the power cord appears to be in good condition, it may be worth checking the power switch to make sure the connection is
...shorts. The belt is intact. It has been suggested the motor is out. Do I have to buy a completely new power head or can this be repaired somehow. Motor brushes may be worn and need
Question about Vacuums
I have 2 power heads and both belts are fine and both are cleaned. I took off stick and put power heads by motor and still do not work. Make sure you are getting power to the power head.
Question about Electrolux Vacuums
...power head is not getting power. How do i fix this? The suction is working just no power to the head for light or brush. Here's a YouTube video describing how to troubleshoot a electrolux 1590 power ...
power head shaft. If the red light is on the power head, then its not the connection because its getting power. Now some heads have a reset button on them,you could check this also. With the cover off
Question about Filter Queen Vacuums
...power head not working, main vacuum working but no power in head when plugged in. any suggestions as to what may be the cause for this to happen. SO Powerhead is not responding when main unit is ...
Power Head. To check, remove the Power Head and extension tube and try again. If the cleaner runs normally without the Power Head attached, then the problem is obviously in the Power Head. First step
...power head not working tried power head from same model and does not either You either have a broken power cable going to the head or your canister isn't supplying power to the head, or the motor for ...
587 questions posted
Usually answered in minutes!
62 Questions
3 Questions
1 Questions
1 Questions
2 Questions