Shark Rotator Professional Lift-Away Vacuum, NV502 - lift-away vacuum "roller stopped spinning" Questions

roller stopped spinning The vacuum still has suction and everything sounds o.k. I have checked the belt and it is not broken. The roller has simply stopped spinning. Any suggestions on how to fix this

...roller is heating up correctly but the rollers are not spinning, there may be a few different causes. Check to make sure that the rollers are properly lubricated. If they are dry or dirty, they may ...

...get the main vacuum to work... what should we do? is there hair, strings, twine wrapped around the roller? perhaps this is the issue, is there still suction by the rollers or has this stopped as

roller just stopped spinning when the handle is only raised half way. So in order to clean the rug, you have to be slumped over with the handle far down. Once you lift the handle more than half way up

...series will break if the roller stops spinning or spins with high amount of resistance. Remove the brush roller and check that it will spin freely, if it does not it would need repair or

...roller to keep it spinning. Horrible design flaw. I am an engineer and find this pathetic. Hope this helps someone. Same problem. Brush won't turn. Changed belts, same thing. Free spins when lifted, ...

...roller that spins with little brushes stopped suddenly and no longer spins. I pressed the red little knob at the end of the roller but it doesn't fix the problem. open up the roller area check to see ...

my dyson roller stopped spinning Hairs stuck in the ends of the roller I had the same problem hit the reset button never heard a click but it started spinning again!

...spinning when the vac is turned on your brush roller could be jammed. the bearing in the far sides of the brush roller frequently pick of long threads and hair and will stop the brush roller or the ...

roller not spinning Possible belt broken.   If you smell an odor like burning rubber it could be the belt that turns the roller if not the belt could be broken already.Possible string or ...