...keeps giving paper jam erro even after changing the fuser unit. Is it a new or refurbished fuser? Where exactly does it jam. By trays, registration or before fuser? Problem can be with various ...
...paper is stuck in fuser, all debris is cleared, just keeps jamming up. IF you can find a fuser. The Di 350 is a legacy Minolta, now Konica Minolta. mite be able to find refurbished unit. If accordion ...
...paper keeps jamming and I want to verify that parts are in good working order - rollers, sensors, etc - Any help would be greatly appreciated. Analyse what type of jam it is...based on that we can ...
...paper jam The 7300 we have keeps jamming at the fuser, the paper will get 1 inch out of it and there it stays... we have replaced the fuser and the exit senor and have the same problem... is there ...
...paper. This keeps going on and on. How do we resolve? The 202.03 error code has to do with an early life failure of the fuser. Try replacing the fuser. If that doesn't work, a tech is needed to ...
...fuser) any pieces of paper there 4) after fuser to output tray all above step checking for avoid any pieces paper obstruct any sensor through all paper road, so that cause jam error hope help you ...
...paper jam The printer keeps jamming within the Fuser. We have replaced the fuser but the jamming keeps continuing. I have already checked whether the trays are set to the correct paper ...
...paper to keep it from jamming? sounds like a broken fuser drive gear.The fuser operates a nearly 400 degrees Fahrenheit and the drive gear cracks and falls off.Lots of trouble for a 50 cent gear.They ...
Question about Canon Office Equipment & Supplies
...The fuser unit was just replaced last month. When I send to print from my computer, the paper keeps jamming up in this area only. One of the rollers maybe not turning check by trying to turn each ...
Question about Sharp Office Equipment & Supplies
keeps saying paper jam and there is no jam, what can I do? Check the fuser for paper stuck in it. Check that the 'paper out' sensor arm (in the fuser) is not broken. If it IS broken, you'll need a new
87 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions