Sharp XG-C55X Multimedia Projector "replace lamp 0 hours" Questions

replace the lamp in my Toshiba T90 it still shows the number of hours the projector has been 'on'. Now that I have a new lamp I want it to track hours from zero. Make sure the main power switch is OFF

lamp life becomes 0%, when used for approximately 4,000 hours with "Eco Mode" or when used for approximately 2,000 hours with "Standard Mode" (see page 43).
When the remaining lamp life becomes 5% or

lamp reset (board or component failure). I have a totally different problem. I have a bad dlp chip and need a donor unit to replace if you dont get this fixed and want to sell it email me @ussmillerco

...the lamp hours back to 0? While simultaneously holding down MENU/HELP, ENTER and the down arrow on the projector, press STANDBY/ON. LAMP 0000H is displayed, indicating that the lamp timer is

...I dont know how to reset lamp time to 0 hour? HI Not sure if its in the handbook but you can download a copy from here ...

...are left when the replace lamp message comes on? usually between 0 and 50, depending on how clean you keep the projector. if it's really dusty, the lamp could explode from overheating at any

how do i reset the lamp timer. I just replaced the lamp and can't get the hours to reset to 0 You can not reset you have to take it Sony Service Center only they can do it

...replace the lamp. after replacing u should rest the lamp timer to zero. if u have already replaced the lamp do the following,if not also. 1 Press and hold the Exit (up arrow) button on the projector ...

...3 seconds. The "LAMP RUNTIME" will change to "TIME RESET [POWER OFF]". Turn off the power and disconnect the power cord. This will reset the cumulative usage time for the lamp unit to

...lamp. How do you get back to the counter 0. Found in the owners manual. It's important to reset the Lamp timer after replacing the lamp since the Lamp timer will trigger the warning message. This can ...