...Don't stomp so hard... the switches don't need a lot of pressure... You may be flexing the circuit board and causing a power loss resetting the internal microprocesssor. You might open the ...
...don't know what to try to fix it, so I have left it alone, testing it every once in a while (it actually worked last night). I have a used MG15DFX that I don't think has been used much. Any ...
don't. This happened immediately after using the CD input. Quick fix, or repair shop? Thanks. Hello, Sounds like a repair shop job to me. Inputs on a amp have resistance thus there must be a issue
...don't mention what the amplifier was. If the speaker were daisy chained to other equipment a ground loop probably formed and blew out the woofer. The horn often has Peavey's "SoundGard" ...
...test it with Headphones etc.. If you don't get any bettering here, you're probably stuck with a real electronic problem, and you have to get the keyboard properly repaired. Thanks! Jesper.
...don't have a lot of $. Thank you for any help. As far as I can tell from this; you could have either one of two problems. 1. Your guitars output or amps input could be loose. This happened to me ...
...don't force anything. then you should be able to see the "pot" from the top. If you can you get electric contact cleaner (I use the NAPA brand) and the spray stick (red tube) that comes with the ...
23 questions posted
Usually answered in minutes!
85 Questions
60 Questions
39 Questions
19 Questions
