Peavey PR15 400w PA Speakers "changing watts amps" Questions

...watts or amps so that you can obtain a power source capable of delivering what you need without overheating during longer periods of use. Adding 25% to 50% more amps or watts to the minimum required ...

...changing speaker cables you have fried something. Since the plug shorts when unplugging, if the amplifier were on, the amp would sense the short and will often fry the amplifier or the speaker. You ...

...all of these small 15 Watt units run 8 ohm speakers... Do NOT expect to get much improvement from changing

...amps input? I need help!!! I play my amp wich is class A hand wired & can go from 15 watts to 30 watts. I can also change the speaker phase with a push button feature. I run the amp hot enough to ...

High pitched squeal when the input jack is used. It doesn't matter whether all the controls are set to zero. Or, whether a guitar is actually plugged in. Once the 1/4 inch jack makes contact with the ...

...watts per channel. That is all you would get from your power amps if you use both of them. The mixer should be enough for what you intend. You can use you monitor send and run monitors through either ...

vox vt40 factory reset Consider reading the Manual for this amp, it explains how to reset to factory with the VFS5 footpedal. Or with the power off ..hold down CH1 & CH4 then turn power on.. when ...

after hour of playing the amp starts the effect popping sound amp stays lit up.cant see any problem except sometimes save lite comes on and it has changed to the user program.the amp sounds like it ...

I have a Marshall MG100HDFX 100-Watt Amplifier half stack (solid state) and I now am not getting ANY sound out of the amp. I changed the fuse and the power module behind the fan, and still no sound, ...

i can hardly hear the sound from this 600 watt system when it's on. why or how do i fix this? it's whispering and when adjusting the volume, nothing changes. Hi, Check you speakers out. Plug them in ...