depends on your speakers, not the mixer. the amp should be matched to the speakers, in watts and in ohmage. for example, 400 watt, 8 ohm speakers should get an amp that runs at 350-500 watts at 8 ohms
Question about Peavey Music
necesito saber que amperio tiene el fusible de entrada de una peavy pr 10 YOU MUST DIVIDE I= P/E I= AMP = P= WATTS E= TENSIONAND YOU WILL GET THE AMPS.SINCERELY. God bless you
Your amplifier driving one of these should be rated at no more than 200 watts RMS. These "400 watt Prrogram" ratings are for the birds... fake advertising. Put 400 watts into this RMS and it blows out
amps times the 40 volts or 400 watts. Across an 8 ohm you get 5 amps or 200 watts. The voltage rails in the switching amp are +/-70 volts DC so these are reasonable values. Bridged mode just uses both
Question about Behringer Music
...watts 400 rms, daisy chained) out of this unit but I am afraid of the incorrect information in the manual. Does anybody know the true specs? According to the specs, I can't even run two of ...
...400 watt head - no sound, Preamp Clip red LED is continually lit, Limiter green LED continually lit - fuse is perfect. It worked for a few minutes, then just stopped. The Preamp Clip red LED is ...
Watts and 400 Program... That is NOT RMS power. Make sure your amp is no bigger than 300 Watts RMS driving this. If you are REAL lucky, maybe a lead has fallen off the speaker... Open the unit inspect
Question about AMP Music
...Stereo Sound Systems 24 000 WATT Car Sound System PART 1 of 2 How To Design Car Audio System That unit comes with speakers that are rated at 400 watts. Any amp that can produce that wattage will
...not less than 400 to 600 peak watts or around 300 watts RMS continuous power rating. Using a lot of high end EQ will keep the amp busy at the high end and reduce the power available at the bass
23 questions posted
Usually answered in minutes!
85 Questions
60 Questions
39 Questions
19 Questions