Hitachi 50V500 50 in. HD-Ready LCD Television "key flash light" Questions

flash twice after the 3.) 3. Press and release the VOL+ key. (The green light flashes 4 times.) I had the same problem Use code #11523, it worked for both my polaroid tv's Someone told me the code was

flash twice after the 3.) 3. Press and release the VOL+ key. (The green light flashes 4 times.) Now the VOL and MUTE keys will work only for the component selected by the MODE switch position. To Lock

...key. NOTE: If the light flashes 3 times before the TV or component responds, you've cycled through all codes and the code you need is not available. You must use the remote that came with your TV or ...

key the light flashes twice press tv key again the light flashes once keep on pressing power to turn off tv if that does'nt work press tv and off button repeatedly until eventually the tv switches off

...key should flash three times and 3. Test the code by trying various functions. If the primary function keys fail to respond satisfactorily try the next code listed for the manufacturer. If its didn't ...

...Key Lock' appears on the screen if any button on the front panel is pressed while viewing the TV. In the unhappier case, this won't unlock the set because there is some internal fault and the set is ...

...code and the indicator light turns off if you enter the wrong code the light will flash rapidly. Aim the remote at your tv and press the on/off key. If your tv turns off you have found the right

...flash twice. [7] Aim the remote at your DIRECTV Receiver and press that the power key once. The DIRECTV Receiver should turn off. If it does not turn off, repeat steps 3 and 4, trying each code for ...

key should flash three times and turn off. If the mode key does not flash three times before turning off, the code is invalid for this device type. Repeat the procedure with another device code. Point

...key. NOTE: If the light flashes 3 times before the TV responds, you've cycled through all codes and the code you need is not available. You must use the remote that came with your TV. Solution found ...