Nakamichi AV-7 Receiver "turntable pre amp low volume" Questions

...turntable is VERY low and is heavily equalized because of the actual record format ( the bass is cut way down and the highs are boosted.....when run through an actual phono input, it "un does" the ...

low volume hooking up old turn table to newer reciever can not get the volume up Most of the newer receivers do not have PHONO inputs. You would have to use external pre-amp with the turntable.

...TURNTABLE AT-PL120 WITH A BUILT IN PRE-AMP. MY TEAC AG-V 1050 HAS THE PHONO INPUT. FOLLOWING THE INSTRUCTIONS I CAN ONLY GET MINIMAL VOLUME FROM THE RECEIVER. TURNTABLE HAS A PHONO OUT OR LINE OUT ...

...idea how to solve this issue? If your turntable is old, it probably does not have a built in amplifier. You might want to purchase a pre-amp to boost the signal a bit before it goes into the

...turntable into the phono jacks on the receiver and from there into regular (not powered) speakers. The volume is very low. A Guitar Center rep told me over the phone I need a pre amp. I thought the ...

...Pre-Amp you will not be able to hear the turntable. It is smarter just to purchase a turntable with a built in preamp. they sell for under $100.00. Or if your really smart throw this receiver in the ...

...pre-amplifier between the turntable and the main amplifier) but in order to be sure for what to suggest to you, please clarify me the brand / model for this turntable. In case of a problem or ...

...turntable into your phone inputs. If there is next to no volume then you need a preamp because you have a magnetic (low output) cartridge. If you have a piezo type cartridge the output should be ...

...pre-amp problem or the receiver is not set to the proper function. If you determain the receiver is working normal, you have a problem in the turntable. Most times it is the stylus or the wires ...