Seagate Barracuda 7200.7 40 GB Hard Drive "sata jumper settings" Questions

...sata hard disk amd i want to male it slave. how can i do this? Look at the jumper settings. These jumpers are located near the data cable and the power port of the hard disk. Usually by default, this ...

...jumper to Slave. If it is SATA, interface, You cannot "SLAVE" a SATA drive. All SATA controllers are stand alone. You just plug it into the Sata slot available & power cable to the HDD. Be sure ...

Hard Drive ide jumper DS How to set this drive jumper to DS ?? Hard Drive ide jumper DS

...lead before removing anything then place the new hard drive in rembering to look at the plastic jumper and its location plug the electical & IDE/SATA lead in restart your computer hope this ...

...SATA Harddisk as a SLAVE? i dont see any jumper settings in may Barracuda 7200 harddisk to change to become a slave. IDE Cable with 3 connectors (you have 1 or need to buy 1) : - blue: conn to ...

...It is also beeping. the power light is on and the cable cables are in and are connected securely. see jumper setting also go to bios and disable native for sata.... wrong pin placment or failed ...

SATA system by removing CD Rom Cable and connecting it to IDE and connecting power cable. Also there is no jumper on this drive as I want to make it slave. Also there is no Operating System on it as I

...sata hdd i got 2 hdd and i want one as master and other as slave . so , plse tell is there any need to change the bios settings or any other adjustments. for this./......... Hi, In first HDD put the ...

...Try checking the website below: ...

...SATA SEAGATE HARD DISC?THE PICTURE WHICH WILL I'M GOING TO ATTACH THE JUMPER CABLE.THANKS....MORE POWER. During the boot process you will see on the screen to press a certain key to enter setup ...