Question about Brother HL Office Equipment & Supplies
...the lights... it then cycled through and the toner light went off...6. I think I then pressed go button to bring on online... Not sure which stage actually accomplished it... but it
Question about Brother HL Office Equipment & Supplies
...toner cartridge 1.Press the front cover release button and then open the front cover. 2.Reset the drum counter: Press and hold down the Go button for about 4 seconds until all the LEDs light up. Once ...
Question about Brother HL Office Equipment & Supplies
...button again to reset the toner. 6. Close the lid. All done! Regards, Michael Pasqualone TotalServe Solutions Try: How do I clear the message Replace Toner from the LCD display? The status monitor ...
Question about Brother HL Office Equipment & Supplies
Using the "+" and "-" buttons select the toner you want to reset. 4. Press the "Ok" button. 5. It will display "Ok?" and hit the "Ok" button again to reset the toner. 6. Close the lid. Hope this helps
Question about Brother HL Office Equipment & Supplies
...button came on and the printer stopped printing. I turned the printer off and back on, to no avail. hello, have you replaced toner cartridge, not just take toner out, and put back in. if the toner ...
...toner cartridge. Turn the printer on. Press the ready button 3 times quickly. It should print a specifications sheet. If it does, try printing from your computer. If this did not help, Brother tech ...
Question about Brother HL Office Equipment & Supplies
...button. 3. Pull out the drum unit and toner cartridge assembly. 4. Push down the blue lock lever and take the toner cartridge out of the drum unit. 5. Unpack new drum unit. 6. Put the toner cartrisge ...
Question about Brother HL Office Equipment & Supplies
...toner light is still on even though I have cleaned the drum, inside the printer and unplugged and restarted the printer. Try this... Power off. Open front door. Hold down the 'Go' Button Power on, ...
...toner, still on will not go off or print. Cleaned everything and verified correct cartridge. Held down blue "Go" button to re-set, still no go. Any suggestions. These printers rely on a manual lever ...
...toner. Hold Go button down until all lights are on. Put drum and toner back in and shut door. Another is. 1. Switch off printer 2. Switch on printer 3. Open front door 4. Remove toner/drum unit 5. ...
13 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions