Question about Ingersoll Rand Air Tools & Compressors
...Oil, cleaned the cooler 30 hp. screw drive compressor overheats even though the filters, oil were changed and the cooler cleaned. thats a very expensive compressor to be looking here or anywhere for ...
Question about Craftsman Air Tools & Compressors
craftman 125psi 1hp 12gal direct drive oil lubricated,is it nessasary to change the oil on the machine? because the machine is running real slow an will not build up pressure Air compressor oil should
Question about Craftsman Air Tools & Compressors
oil on 1.5 hp,2 gal. air compressor run the machine until it fills up then unscrew drain plug on front or underneith pump unit once drain replace plug and unscrew filler plug and fill with oil till it
Question about Craftsman Air Tools & Compressors
How do I and how often do I change the 2 stage oil? only if its dirty, but how often is the compresor runing in a week? if you change the oil once a year thats fine,,,just keep it toped up
Question about Dewalt Air Tools & Compressors
I want to change my EMGLO D55155 compressor oil. What type and how much oil should I use? Thank you! The compressor tanks 4 ounces of oil. You want to use a synthetic oil in this unit. We like to use ...
Question about Honda Air Tools & Compressors
...changing oil? Nice compressor! The gx160 engine needs a little more than 1/2 quart. (.6 to be exact) Honda recommends changing oil every 6 mo. or 100 hours with 10-30 for cooler climates and 30 for ...
Question about Honda Air Tools & Compressors
i have a honda gx160 5.5 generator will not start with the, i believe oil sensor plugged into the turn off switch oil level ok will i need to change the sensor also is this a big job. i have never ...
Question about Craftsman Air Tools & Compressors
how to change oil pump in a v10 Triton F250 with 4 wheel drive Changed out oil sender unit but oil pressure read fine in idle speed But when driveing it down the road oil light comes on with low ...
Question about Jenny Products Air Tools & Compressors
What grade oil doI use to change the oil? Your comressor comes from the factory filled with Jenny Synthetic Blue Compressor Pump Oil. This is a 30 weight oil. The picture below is Ingersoll Rands ...
Question about Ingersoll Rand Air Tools & Compressors
when I check the oil sight glass for the level, I notice that the oil color tunr into mikly white, so I decided to change the oil, upon draining the oil from the comppressor I noticed that the oil was
92 questions posted
Usually answered in minutes!
49 Questions
42 Questions
38 Questions