2010 Dodge Journey "cost replace rotors car" Questions

Replace the fuel filter if not every oil change every other. I like doing them that often as they are cheap enough and a clean filter never hurts. It use to be said to change an oil filter every other

...cost, most drivers opt for semi-metallic pads when replacing them. Most manufacturers recommend anti-squeal shims and/or compound be applied to brake pads for disc systems, but they are often ignored ...

...replace [both]front brake pads. cost? i would charge [brake pads cost $55.00] labor,$60.00] total $115.00 thank you for choosing fixya.com if the frontend shakes when braking you need to replace the ...

...replace rotors due to warpage rotors too warped to turn?this is usually a problem on sports cars. I would recommend drilled rotors,they cost more but may be cheaper in the long run.hard braking or ...

...cost $40.00 to $50.00 each there will only be 2 rotors on the front and the brakes are complete for the front,both sides,on the front. as a general rule you'll replace your front brakes twice before ...

...cost, pads? Must the rotors be done or can just the pads be done? All shops will tell you that you need to turn or replace the front rotors when you do brakes. I personally only replace rotors, and ...

...cost of 10 to 20 dollars. The problem is your either riding the brakes so much they are overheating and will happen again. Or you have a problem with the calipers sticking. Since you only have 60k ...

...cost for rotors and pads were not more than 70 a piece, my back rotors alone cost me 169. Is this correct? What an I do if it is overpriced? I feel like I have gotten ripped off, the prices I get ...

...cost will be to fix. Your rotors are warped. Depends on if rotors can be turned or have to be replaced. Turrn rotors would be under $50. New rotors--check price online. I had the same problem. Rotors ...

replace the pads with ceramic ones and get new rotors(look into the cost of performance ones, ck Rock Auto). The cost of rotors would out weigh the time and effort taking them to be cut. In some cases