2010 Dodge Grand Caravan "headlight switch relay" Questions

...fuses in the (pdb) for eitherthe headlight switch. The bright lights on the dimmer switch work but don't stay on. There is power to the low lights on the dimmer switch. Help!!!! the head light ...

...switch and headlight switch and they check out with the ohmmeter specs from my repair manual. I can jump power to the relay for the headlights which turns them on. there is no power getting to the ...

Headlight switch does not turn on headlights. High beam can be turned on with hi/lo lever switch. No voltage at headlamp connector. Swapping headlight relays did not help. BCM was replaced last year. ...

...switch in 1998 dodge caravan? They are not a fuel pump switch but they are a relay & fuse in the main fuse/relay box under the hood its black and on either the right or left corner behind ...

...hood. u need to remove it by taking out the four torx screws. Then clean the prongs with needle nose Wiggle the headlight switch,see if the lights act different,they had a bad issue with the

...switch in the dashboard and they still don't work.The parking lights work and the high beams work.I checked to see if I was getting power to the relay and I am. What should I do next? Hi lo ...

...headlight switch, but can only find 12v in, must be low voltage output. Am I missing a relay or head power module that I cannot find on this truck? Yes, the control system is low power. In theory, ...

...headlight switch sends power to the dimmer, then thru the body control module, then the high and low beam relays, then the four fuses, then the actual headlights. So you should have power on the low ...

...relay is hard-wired to the BCM and also wired to the multifunction switch (dimmer switch) for switching between beams and optical horn operation. Grounding of either of these circuits will energize ...

...headlight switch in either in the parking light position or headlights on position, and now they don't come on at all anymore. I replaced the relay under the hood and still nothing. so before I start ...