2010 Chevrolet Cobalt "pcv valve" Questions

able to find the replacement part for the pcv valve. Just the hose. Standard Motor Products part # V415 is the valve I see listed if you're careful you can reuse the hose. I hope this helps. Take care

blowing oil out of dipstick tube on a 2007 cobalt ss Too much crankcase pressure. Check pcv valve and hose. AMy be clogged. Repalce valve and clear hose thoroughly u need a new head gasket

where is the pcv valve on the 2010 Chevy Cobalt It is an integral part of the valve cover. Cannot be replaced

code 420 engine 2.2 engine is using oil no smoke no leak Ck your PCV valve sometimes they will stick

Where is located a pcv valve on a cobalt 2010 on the upper intake manifold.

...PCV) valve located somewhere on the cylinder head cover. The big rubber grommet around the PCV valve is a common cause of vacuum leaks. Check that the PCV valve is making a snug fit inside of this ...

...through leaky diaphragms, split vacuum hoses or faulty pcv systems. It is also worth checking the egr valve if fitted. What is the make model and year of your car? What is the engine

...PCV) Valve ? 3.0L (2V) Removal and Installation Disconnect the positive crankcase ventilation (PCV) valve tube quick-connect from the PCV valve. CAUTION: A new PCV valve must be installed if removed ...

...pcv valve in 97 chevy lumina PCV VALVE LOCATED IN THE FRONT VALVE COVER.JUST PULL PCV VALVE OUT VALVE COVER. THEN YOU PULL PCV OUT OF THE END OF HOSE THEN INSTALL THE NEW ONE. FOR THE 3.8 ENGINE ...

...pcv valve? Here's a link on replacing your pcv valve. Repair Guides Routine Maintenance And Tune up Pcv Valve AutoZone com Here's another link to a new pcv valve. AZ Filters PCV Valve PCV1106DL ...