Pioneer DEH-P6600 CD Player "telephone mute wire" Questions

...telephone mute cable at the back of the unit which has probably come into contact with another wire. Take the unit out and make sure the telephone mute wire is insulated properly. This happened to me ...

Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.) Basically, you don't hook it up unles you have a cellular telephone in your vehicle, not a personal cell

...Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections. Orange/white To lighting switch terminal. Blue/white To system control terminal of the power amp or ...

...the car died, now im getting no sound out of the system and how do i fix it? think it may have something to do with the wire on the harness that has the "telephone mute" on it :S try resetting it. ...

...Bluetooth or not. It would have a wire that would be connected to your Head Unit to enable the Telephone Mute or Att, as you choose. If you dont have a car kit, it is of no use to you. Best of

...Control wire (used with ext. amp only). Do not expose this wire, if no amp is used. Blue: Antenna Control wire Brown: Telephone Mute wire (used with handsfree carkits). Hope this helps, Cheers, ...

telephone mute wire in grey plug causing a connection to ground. If you dont have a phone, Simple answer is remove the brown wire pin from plug, tape over it to stop any short, re-insert grey plug and

...worry about the brown wires. They are for telephone mute. The yellow is Memory (constant 12 volt, so battery is fine), but the red should go to a 12 volt source that turns on and off with the

...telephone mute) and i have power to the amp only in tuner mode.... help please! thank you, jollyblueimpala open the fuse box and find acc and that out the fuse then take the remote {blue wire } from ...

...telephone mute problem Hi I have installed my Jensen Vm9212 into my car and had no problem with it until now. The tel mute feature is on and will not turn off. I checked the the wire and made sure it ...