Pioneer 1000 Watt 5.1 Surround Sound System System "hdmi direct tv wiring" Questions

If the Blue ray unit does not start at all and stays in stand by , then the HDMI cable you are using to connect to TV, or HDMI port on TV may be defective. Try replacing cable and swapping HDMI ports

...TV HDMI input which won't give you any sound. Normally ARC is intended to put the s/pdif signal from the TV's internal tuner on the HDMI cable from the HTS so the HTS can play TV sound without having ...

...tv as well as Samsung's DVD home theater HT-x50. I have connected them via HDMI. However, i can get sound only from DVD or tuner. When i attempt to get sound from tv programs playing i am unable to. ...

...THE SETTINGS IN THE PS3 AND STILL NOTHING. SO I HAVE THE PS3 HDMI TO DVI CABLE GOING TO MY TV, PS3 OPTICAL (OUT) CABLE GOING TO SURROUND SOUND OPTICAL (IN). SHOULDN'T THIS WORK...? ANYONE HELP

HDMI cable connection on your system is a video out to your TV. To get audio from the TV so you can hear it through the system, you need to add a cable from the audio out of your TV to the "aux" input

...TV has only one HDMI, you will have to choose which source uses it. HDTV would get my vote for it as it needs the best conenction for maximum enjoyment. If the TV has Component (3-wire) Video inputs, ...

...hdmi directly to the tv and get both audio and video (so both ps3 and hdmi cable are working fine). tried hooking up ps3 to bose system with hdmi and optical digital without success (again just ...

...audio to the TV so you can watch it without the Pioneer turned on. And route the best Cable Video (HDMI, Component?) directly to the TV. Unnecessary paths through the receiver can degrade the

...tv now using hdmi cables, rca av reciever does not have them... You can check your dvd player for a coaxial or an optical sound output, then you can plug it directly to your receiver. Those two are ...

...direct to the TV and had the same result. Any way to fix this? You're Going to have continuous problems like that with your current configuration. You should plug your video and audio cables directly ...