Question about Measuring Tools & Sensors
...indoor and outdoor units for 10 minutes. Then put the batteries into the devices with both side by side (working inside is easier). Wait until the outdoor data is displayed. There are some weather ...
Question about ATOMIC Measuring Tools & Sensors
...outdoor data. On the indoor unit, there is typically one battery that is used for receiving the signal from the outdoor unit. If all of the batteries are in correctly but that one, you will see the ...
Question about Equity Time USA Measuring Tools & Sensors
Outdoor temperature on indoor station showing - -. Outdoor sensor not showing temperature on main station. Check the battery in the outdoor unit, resync them per the instructions, if that does not ...
Question about Measuring Tools & Sensors
...outdoor and indoor units then reinstalling batteries first in the outdoor unit then the indoor unit and waiting for 10 minutes WITHOUT PRESSING ANYTHING while the two units "talk" to each other. This ...
Question about La Crosse Measuring Tools & Sensors
Indoor : 14.2F to +139.8F with 0.2F resolution (-9.9C to +59.9C with 0.1C resolution) ("OF.L" displayed if outside this range) Outdoor : -39.8F to +139.8F with 0.2F resolution (-39.9C to +59.9C with 0
Question about Acu-Rite Measuring Tools & Sensors
...are recommended for the outdoor sensor it is not recommended they be used in the indoor display unit. Try using a good quality, fresh alkaline batteries and you should find your display turns back
124 questions posted
Usually answered in minutes!
14 Questions
6 Questions