Mitsubishi HS-U260 VHS VCR "cassette loading" Questions

Ad

Question about Toshiba Televison & Video

1 Answer

...cassette is pushed into and if there is no detection the loading motor does not work nor the lock is moved to let the tray move on into the loading tray. So when you put the VCR ON/OFF the detection ...

Ad

Question about Televison & Video

1 Answer

...cassette slips back when loading starts. Try keeping a finger on the back of the cassette as it loads into the machine to keep it engaged. Don't jam your finger, as soon as the tape goes forward ...

Ad

Question about Panasonic Televison & Video

1 Answer

Panasonic SQPB will not load cassette Earlier it would not eject cassettes without leaving part of tape around the capstan, etc. Now it will not load the cassette at all, ejecting it after a few ...

Question about Zenith Televison & Video

1 Answer

...loading motor can assist to push out the cassette, make sure the motor connection is removed from the circuit so as not to damage the loading IC. 3. Some cases the capstan also is the loading motor ...

...cassette loading mech is not accepting the tape It could be miss-aligned in it's position or one of the sensors is defective or the motor is bad A frayed/ broken flex cable in the cassette ...

Question about LG Televison & Video

1 Answer

...insert the cassette. This is not rocket science - you may see what the problem is. At one point the loading mechanism engages and takes over when you insert the cassette. Dont touch any metal

...cassette loading mechanism, then turn the motor shaft with your fingers (many many times) until the cassette is unloaded. Usually the moter is easy to get at on top just to the right of the cassette ...

Question about Panasonic Televison & Video

1 Answer

Cassette loading process won't complete When I insert the cassette, the carriage retracts backward into drop position but then fails to drop and the cassette door never closes. There are no ...

Question about Panasonic Televison & Video

1 Answer

...cassette. Fault F04 has displayed once. Power is still on with clock display. F04 is "loading lock". most likely problem is that the timing of the gears in the tape loading mechanism is

Question about Panasonic Televison & Video

2 Answers

Cassette has to be inside the machine to set it up. The good news is that parts are easy to get hold of, so if any thing is damaged it can be replaced. Curry's partmaster is a good place for parts

Not finding what you are looking for?
Televison & Video Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...