Mitsubishi HS-U448 VCR "adjust heads" Questions

...adjust any of the azimuth settings on the guide arms or control head this will only cause more problems. It sounds as if you just have dirty heads, either try a head cleaner tape, or better try to ...

...heads, or mis-alligned guide rollers. First,adjust the tracking on the player during playback. This is done by pressing P+ or P- on the remote control. If this doesn't work, use a video head cleaner. ...

...adjust, some are driven by the remote. If the 'tracking adjustment' system does not work, then the video heads are dirty and need to be cleaned. The use of 'head cleaner' tapes is NOT recommended as ...

...play a tape back. Shows ''Trac'' as problem but no idea how to fix it "Trac" means tracking. If adjusting the tracking controls doesn't solve the problem, you might need to clean the tape heads ...

adjust the tracking? [email protected] the video heads are probably dirty. it only takes one tape with one little spot of cola or juice or something on it to gum up the heads. a vcr cleaning tape

heads were worn, they should affect the entire picture, so I think you can rule that out. The guideposts on either side of the head control the location that the tape tracks across the head. If one of

...any cleaner as it causes film on the head, other solution is your auto tracking is off and can be adjusted by slightly turning the arms that hold the tape around the head while it is playing and ...

...heads are cleaned you acn then try to adjust track to obtain the best picture. If you can not you may have video head problems or a problem in the drum motor (servo) mechanism. In which case I advise ...

...adjust the tracking control all the way to one side I get a very week grainy off-color picture from top to bottom. Tapes recorded in SP mode on another VCR's will not play in this Sony VCR. EP is ...

Audio Adjustment Distortion is heard during loud parts of a tape. I tried adjusting the three screws that control the audio head but still not perfect. I have test equipment- What is the correct way ...