Mitsubishi HS-U770 S-VHS VCR "repair eject tape" Questions

...eject the tape to prevent damage. This is a simple repair for anyone that has done these before, but requires an alignment check. This check requires a special alignment tape and equipment. This ...

...eject hit,tape crunches and james. Looking at the operation with the cover off, I don't see how the tape can be lifted free of the rollers to eject Before I retired from IBM I repaired large system ...

...eject button multiple times before the tape ejects. This probably indicates a problem with the mechanicals. The tape carriage mechanism might be out of whack/bent/or broken. You might take the top ...

...eject the tape. What's the easiest and safest way to remove the tape? I don't think I could repair the VCR, no experience with repairing electronics, but I would like to recover the tape, prior to ...

...up side and spindle then try tape again if same resaults clean the sensor where tape sits if same again screw lid down and take for repair but if in 1 yrs warranty take straight for repair. good ...

...a small spring that has detached itself from the door. There might be some plastic damage, which could be repaired. The only way to see what is happening is to remove the top cover and eject the

...out of the machine is to take the cover of and manually free the tape. Any clues? you need the vcr repaired as the idler needs

...down the eject button. Also, now when it does eject the tape, the tape comes out slightly crooked. What can I do? probably a bent cassette housing in the deck - time to seek out jvc authorized

...eject. TApe will start to play and then nothing. No rewind, oFF. Hmm, since this is a later model, I'd guess, they might have skimped a bit. If you haven't already contacted the manufacturer, I'd ...

...repair due to parts acquirement it may be best to get a new recorder. 3. Addressing the belts. The belts usually grips a pulley which in turn turns a gear that moves the ejection tray ...