...F9A04 and F9A05 are open the convergence ICs will need to be replaced as well as the two pico fuses. You will need two STK392-570 Convergence ICs and two 5 amp pico fuses. You ca get the replacement ...
...pico fuse and they are still open. so they say it must be my ic yes when either of the two Pico fuses F9A04 or F9A05 fail its caused by the convergence IC. replace the IC and both pico fuses should ...
...pico fuses F9A04 and F9A05 if either one of those picos are open it means the convergence Ics are bad along with the picos. Your set uses two STK392-570 ICs and the two picos are both 5amp picos. You ...
...and checked the 2 pico fuses F9A04 and F9A05, the F9A04 is blown, what I should check next? can I get detailed instructions on how to fix this problem? thanks! Your STK convergence ic's need
...Fuse F9A05 will read open in circuit but F9a04 wont so its best to lift one side of those two pico fuses out of circuit to check them. (* % of the time a 22 code in that chassis its the ICs having ...
...Any guidance? Thanks Phil Check these two green pico fuses F9A04 and F9A05 to see if they have continuity, if they dont have continuity the Convergence iC and those two picos will need
Question about Mitsubishi Televison & Video
...same time. What does that indicate? tHats indicating a short. Check the two green pico fuses F9A04 and F9A05 on the center board if they are blown replace the two 5 amp picos and the convergence
Question about Mitsubishi Televison & Video
...protection shutdown. Check The two Bright green pico fuses on the center board for continuity F9A04 and F9A05 if they dont have continuity. The convergence ICs and both picos will need to be
Question about Mitsubishi Televison & Video
...F9A04 & --05 fuses. I get the 2-2 diagnostic flash and have proved it out with a simple continuity test. My only problem is finding a place that sells those fuses. If anyone knows of a store in the ...
...IC801 and IC802 which are both STK392-570 and you will also need to change the two 5 Amp pico fuses which are F9A04 and F9A05 they are both % amp pico fuses. All parts are located on the center ...
646 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
482 Questions
301 Questions