Mitsubishi WS-65809 65" Rear Projection Television "color coding resistors" Questions

A resistor burned can see color code .the pannel where is mounted read :R468. How do I find out the code? Tell me the colors and I can give you the value, or check Wikipedia - input" resistor color ...

Convergence Resistor Hitachi 50DX10B Hi I have a blown RK46 half watt resistor (faded colors) in the convergence pannel. I cannot read the coded colors. If anyone help me to send the value of it or ...

... of a resistor for a Panasonic PT53WX53G projector big screen tv. It burned up so I can not see the color codes on it. his resistor glows red when TV is turned on until circuit protection shuts power ...

...color code off of resistors 3156 and 3164. Researching resistors--- What caused the resistors to burn?? Have you already fixed that? If so, what exactly was it ??? let me know...T. Resistor 3156 is ...

...color band. would you say thats a bad resistor or? I have checked all the other ones and they seem to work fine, no discoloration whatsoever and the are not too far off from their coded resistance ...

color convergence Hi. My T.V. is actually a TP50F60 built on 11/96; chassis #tac9675. Colors are off. Convergence red adjusts OK but blue won't adjust horizontally but will vertically. I replaced 2 IC

...color code guides just in case the value numbers are not printed on the resistors http://www.dannyg.com/examples/res2/resistor.htm Good Luck!!! All those resistors and a pico fuse around the ...

hitachi 53uwx10b burn rk 99 need color of it i can not see color of rk 99 4 color resistor please The value of RK99 is 3.3 ohms, 5% and 1/2 watt. yes , it is a 3.3 1/2w 5% tolerance//color code;/ , ...

...color)...What does this mean? Thanks very much. The error codes only indicate the convergence circuit is not working. In this set it is VERY important to check the 1.8 ohm resistors, if even one is ...

...color code to find out what value they are....However, usually if there is any damage, the resistor will look like it has been HOT or fried. replace the IC's and any bad resistors, and you should be ...