Mitsubishi WD-52525 52" Rear Projection HDTV "status button blinking tv" Questions

...status led blinks, and sometimes the time led blinks, and sometimes after several attempts the tv turned on for few minutes then shut down by itself. I tried the reset button and hold the menu button ...

status light is blinking red on my mitsubishi wd-62526 When the status light is blinking push the device and menu buttons on the tv at the same time and hold for 5 seconds or more.  The red light

...status light is still blinking and then will completely shut off. Unplug the tv for about a minute - plug it in and press the reset button on the front of the tv - hold it until the light blinks. The ...

button for 10 seconds and the yellow status stops flashes and turns green for a second. I hear a click from the back of the set and then the status light blinks yellow again. Based on your description

tv will not power on. no red or yellow status light. Status light green, blinks rapidly, then blinks 1 time followed by 3 blinks. wait for the light to go out then press power. Then if it doesnt power

...status button had turned from green to yellow about 4 months ago but no blinking so I did not replace it yet. Can anyone help me out Please!!? Model Number WD 62525 I looked up the manual online - ...

...status light is on but not blinking and picture wont show at all??? the picture became dim about 2 days agao, i woke up this morning and the status light was red and not blinking and the picture ...

The red status light is blinking and my t.v wont turn on the reset button didnt work and I dont know what to do I chANGEed the bulb on my tv it use to blink red now blink yellow and wont turn on

...Power button on the control panel at the same time for 3 seconds. The status indicator will blink twice. The timer will be reset to zero hours. Thanks for using FixYa and the generous rating. ...

...button. After the Timer light stopped blinking I pressed power. I could hear the fans start than a somewhat loud "click" and the status light starts to blink red. I removed then replaced the lamp and ...