Mitsubishi WD-52525 52" Rear Projection HDTV "signal" Questions

where do I get a PWB-signal 930B923002? I previously posted the blue screen with sunburst pattern problem. I replaced the lamp and still have no signal - just a blue screen that is flickering and ...

...on black screen). What is this? The Control PWB only causes this defect when the Backlight Control Signals are Output from the Control PWB No LVDS(Low Voltage Differential Signaling) signal may also ...

...DLP and the timer light is flashing on and off and I cannot turn the power on or off on the TV Bad signal board, DM module and or formatter board. Try replacing the signal board first. About 50% of ...

I have a wd-60735 tv if i hook up a convertor box to it i get air channles if i just hook up the antenna to it it wont find any channells what could be the problem? Thanks As of 6/12/09, the over-air ...

no signal, blue screen ok my mitsubishi WD-52525 is not getting a signal from any inputs. There is a blue screen with lighter wavy stip in the middle horizontally. Even a simple video game plugged ...

shadow lines on screen My 52" Mitsubishi DLP works great with a hi def input signal but with the DVD player or regular TV signals shows a slightly tilted series of faint lines in the background. Not ...

Signal board Hey wich one is the signal board? Also PTS quoted me $249 to repair the format board, I am pretty sure that that one board was my problem, I checked over the rest of the boards and other ...

dlp picture showing pink and green Hello sir, good day, your dlp is missing the B (blue) color from the RGB signal, this is caused by the Blue wire open, replace your dlp signal cable.

3d setting is greyed out You may not have a 3d enabled signal. without a 3d signal you cannot turn on the 3d setting

...srill on and the tv come ongos to a blue screen about 3-5 min. then gos off blue screen usually is signal related. it will shut down after a few minutes if it doesnt detect a