...Exposure lamp problem • Check the CCD input value for the lighting status of the exposure lamp 100 ms after the exposure lamp is lit and the carriage is moved to the shading position. If the exposure ...
...check the exposure lamp. Display: CCD: Main Exposure Lamp CID: Document Processor Exposure Lamp (inside the feeder) Method 1. Press the start key. 2. Select the item. 3. Press the start key. The ...
...check the Exposure lamp if it damage replace it . 2- check the Exposure lamp fuse ( located in scanner ) 3- check the Exposure harness . and after you solve your problem you must Enter SP5-810 (SC ...
Question about Office Equipment & Supplies
...check exposure lamp harness connections; adjust position of contact glass shading plate or clean/replace the scanner home position sensor; replace the exposure lamp or inverter pcb if needed; replace ...
...Check the exposure lamp, if defective replace. Check inline exposure lamp fuse, if defective replace. Also check flat cable from CCD to MCU PWB , if cut or defective replace. Last -- brds
...check the exposure lamp, lift the cover press print the scaner lamp should on otherwise this lamp is defected, now to check fuser lamp, you have to removed fuser unit, use ohm meter to check its ...
Question about Sharp Office Equipment & Supplies
...Check the exposure lamp, if defective replace. Check inline exposure lamp fuse, if defective replace. Also check flat cable from CCD to MCU PWB , if cut or defective replace. Last -- brds
Question about Canon Office Equipment & Supplies
...sir;Try to make a copy with open cover ( check the exposure lamp is on), if exposure lamp not on andyou already replace a new one then check the thermos fuse at the end of the lamp, replace that
...Check the exposure lamp, if defective replace. Check inline exposure lamp fuse, if defective replace. Also check flat cable from CCD to MCU PWB , if cut or defective replace. Last -- brds (boards) F ...
...E0061-001 Pre-exposure lamp Does the pre-exposure lamp turn on during copying operation? Check the wiring from the DC driver PCB to the pre-exposure lamp; if normal, replace the pre-exposure
753 questions posted
Usually answered in minutes!
382 Questions
267 Questions
215 Questions
218 Questions
230 Questions
