Everest Refrigeration ESR2 "evaporator fan motor not running" Questions

...fan or evaporator fan motor are not running, Ice build up on evaporator and restricted the air flow. If compressor, condenser fan and evaporator fan motor are running but not cooling, then either ...

Evaporator fan did not start running when condenser fan started. Evaporator fan did not start running when oondenser fan started with timer. Fan came on some time after I left home to to to part store

...evaporator fan motor draws cold air over the evaporator coils and circulates it throughout the freezer. If the evaporator fan is not working, the freezer or refrigerator will not cool adequately. To ...

...evaporator fan! If its not running, it can be due to several reasons. First check for voltage at the fan motor. Then make sure nothing is caught in the fan blades. If the blades are free and there is ...

...Evaporator Fan Motor The evaporator fan motor draws cold air over the evaporator coils and circulates it throughout the freezer. If the evaporator fan is not working, the freezer or refrigerator will ...

...evaporator fan motor located behind the rear wall of the freezer click this link http://c.searspartsdirect.com/lis_png/PLDM/00052094-00007.png  part number 17 on the schematic would be the panel ...

...not the evaporator fans. Fans aren't seized up. What's going on? Evaporator fans must be running at same time as condenser fan. Check schematic to locate source of problem Is power reaching the

...evaporator fan motor. You have a bad evap fan. This is the fan that is behind the back panel INSIDE the freezer. ------------- This code is for the evaporator fan motor but it could also be due to a ...

...evaporator fan has stopped. it is usually in the back of the freezing compartment behind all the plastic. when the fan stops no air can circulate over the cooling coils so even though the compressor ...

...evaporator fan not running smoothly GE Profile Frig. (replacing evaporator fan motor) Think I figured out the problem but wanted to pass this issue along. Appears I put the fan on too snug to the ...