Craftsman 675 Torque 190cc 21" Briggs Stratton RearBag Push Lawn Mower (CA) () "stratton mower engine throttle" Questions

...stratton engine? If it the simple handle type throttle cable..push it to full tbottle and follow the cable to the carb..you should fund a small clamp that hold the cable in position..jus loosen and ...

...stratton push mower engine doesn't run smoothly, it revs up and down If your lawn mower has no throttle lever, it is most likely the throttle spring. it is too tight or too loose, you will ...

...mower with briggs & stratton engine starts & idles fine pushing throttle forward it just stays on idle throttle appears to have full movment can you help Make sure the throttle cable moves ...

...Stratton Engine. The mower starts after I prime it 3 times. Starts up and runs at only half speed. I have taken the whole thing apart, changed the gas, cleaned the carb, not sure why it is only ...

throttle cable is off and hanging on my briggs stratton push mower, do i need to replace or can we just fix thank you if cable is all intact, just hook it back up, if broken, then replace it.

...stratton engine. Engine starts fine but will not run regularly.Keeps revving and then dying back and then revving again continuously. Check the governor spring and throttle linkages, something may ...

...stratton engine throttle cable and throttle body wont engage,always wide open My wife's paw paw gave me this mower and he did some of his own repairs like rerunning the throttle cable.I can ...

...stratton engine from a rotary mower? Hi, You'll have to pull the mower blade off. Then there are bolts (probably 4) attaching the engine to the mower base. Once the throttle and any other cable you ...

...Stratton 675 series 190cc push lawn mower. The cable you are trying to replace is the OPC cable (engine brake cable), not a throttle cable like you are trying to fit. You need to take it back and get ...

...stratton sp 460 engine will idle but not rev I suspect the push rod for your throttle isn't pushing the throttle lever down on the carb. When you move the lever up on the handle bar then it should ...