5301 LE 2 Way Car Remote Starter System "starter flashing blue" Questions

...STARTER IS CLICKING AND/OR FLASHING THE PARKING LIGHTS AND IS NOT RESPONDING TO THE REMOTE, IT IS IN SAFE MODE AND NEEDS TO BE INITIALIZED BY DOING THE FOLLOWING: If you have a 4 button remote, you ...

...starter shuts down (probably when the parking lights come on); the 901 is seeing a drop in voltage and you need to hook up the tach wire. Connect the green/orange wire to an uncommon wire at a fuel ...

...blue/black brake wire (press and hold brake pedal if wire is installed). Press and hold any button on your remote until clicking and flashing stops. Unit will now respond to the remote. Remove ground ...

...blue/black brake wire (press and hold brake pedal if wire is installed). Press and hold any button on your remote until clicking and flashing stops. Unit will now respond to the remote. Remove ground ...

remote starter works fine. but the blue light on remote antenna is flashing when vehicle is not running. This is normal.

starter will not work. Blue light on remote flashes, but car does not flash lights or start. Please help. Thank you. It can be caused by water in the pin switch and because is very cold it may be iced

starter. Afterwards when I tried to remote start it the only response I received was the parking lights flashing three times. I am installing it into a 2002 Jeep Liberty. Check that the blue wire goes

starter (white) to the ground when running connection of the Xpresskit (blue). You could even go so far as to connect the ground when running of the bypass to constant ground for the test. You CANNOT&

starter button(circle w/arrow) until LED blinks three times and the amber transmit LED lights up. Now you have to enter the remote control learn routine: Turn ignition on, within ten seconds press and