Precor C956 Treadmill with Cardio Theater Option (Used) "tights" Questions

No matter what button I push it beeps3 or four ties. replace the old batteries ( if your system use batteries, and clean and tight the springs contacts from oxide, dirty, corrosion, use contacts ...

Buttons not working Both of the incline buttons, as well as the STOP button and the "increase" speed button have stopped working and I am not sure why. replace the old batteries( if your system have ...

Display is not working tight the ribbon cable from keypads , clean it +tight the wires connector from display board vs lower board and clean it.2) adjust the reed switch, clean it and tight the wires ...

Precor 954i the stop button is stuck try to tight the RIbbon CAble inside for keypads, and tight the upper cable vs lower cable. 2) Adjust the REED swtich, test it, clean it, see the diagram, and ...

i have a precor 5.23 ellipital. I am getting a clicking sound what can i do 1) just tight any bolt and nut with socket wrench. and tight any wires connector. Of course your unplugged the machine ...

Error code 7 W hen I press start the display says ec07, Dear Sir:The error 7 has 2 alternatives:1) Elevation motor a) lube the gear, bar, tight the connector very well b) adjust the potentiometer. Run

I plug in my treadmill and before the key is in it inclines all the way to 12% and sounds like it would like to keep going. I cannot use the console to control it, it doesnot respond. adjust the REED ...

horizon fITNESS t850 The speed button does not work tight the ribbon cable in display monitor and clean it. with contact cleaner. Tight the upper and lower connector and clean it very well Adjust the ...

95Ri display board will not work 95ri will not work no display any ideas 1) adjust the REED switch, see the diagram clean it , and tight the wires connector very well.2) tight the ribbon cables from ...

I have a Reebok 8400C treadmill. The control panel stopped working .. I get power but no buttons are functioning? 1) replace batteries and clean contacs with c.cleaner, tight the connector very well 2