Craftsman 27cc 2 Cycle Crank Straight Shaft Weedwacker Gas Trimmer () "shaft trimmer turning" Questions

apart and maybe you can figure the shaft problem out good luck bolins trimmer 2011 curve shaft MID 41BD110G965 can i remove the centrifugal clutch assembly does it have a screw ? and how do i do that

trimmer shaft to the engine, remove the shaft. Then insert the correct torex head driver into the center of the clutch cover. There is a screw (the same head as the screws that holds the trimmer shaft

...trimmer.if the atachment shaft is stripped, the the attachment needs replacement. if you replace the motor portion you need not lubricate the attatchment slot. if the attachment is stripped, it needs ...

ryobia trimmer won't idle. c430 curve shaft most likely to rich low speed screw try turning it in 1/8 turn it should pick up rpm then back off the idle a scoche

...shaft/ head won't turn when connected and running I recently got back from oversea's and my son was using my ryobi. He said that it was working fine and now all of the sudden the trimmer head where ...

craftsman 27cc weed wacker will not turn shaft when running weed wacker starts fine, just will not turn shaft to engage head Replace head gear box.

What are the correct settings for the low and high speed adjustments on a Walbro WT218 carburetor on a SOLO line trimmer? This will generally get you close: 1.5 turns for both the "H' and the "L" ...

...trimmer has been used for a long time you probably need to replace the centrifugal clutch. The high friction coeficient ferodo gets warn out and power dose not get transfered to the drive shaft. ...

...turning shaft new engine. runs great, but when you give it trottle, it is like some thing is holding it back. the head with spin freely, nothing is jammed. it is just when the clutch slings out it ...

...shaft on my ryobi stoped turning, how do i fix this problem. You didn't quite give me enough info on which machine you have ... but if it is one that allows the lower half of the shaft to be removed ...