Hampton Technologies Brinks Timer "setting time lamp" Questions

...setting trippers -Insert trippers -Red tripper is ON -Black tripper is OFF -New timer has 2 sets of trippers Set time -Plug-in & turn-on power pack Turn dial clockwise to set time of day Manual ...

...lamp. I began playing with it and reset the different time programs. I need instructions as to how to reprogramme. Also there is another timer (Noma) which is connected to another lamp. Both of these ...

...setting switch and trippers, manually rotate clock dial until current time line up with arrowhead located on inner dial. Dial rotates as time passes, and trippers push switch that turns lamp on-off ...

...time of day arrow 6) Plug in your lamp and make sure the lamp's switch is in the on position 7) Set the slide switch at the top to the timer position If this does not help, please contact technical ...

...setting Following page shows GE 15075 timer and manual. Page also shows close-up image of pins used to set on-off times. http://waterheatertimer.org/GE-timers-and-manuals.html#15075 If this is not ...

...lamp turn on-off. Notice also that timer has switch located on top. Move switch into one position and manually rotate dial again. Move switch to other position and manually rotate dial again. This ...

set time. Lamp also has a switch but of course I didn't turn that on. Please where am I going wrong. I would start by turning on the lamp,if switch is not on lamp can not get power when timer comes on

...lamp on to the time you want it off must be pushed down. In other words, the lamp will light only when the timer reaches a pin that has been pushed down. You could have the timer turn a lamp on and ...

...lamp at 8 PM and turn off at 10:05 PM - Do I set it on "Timer" or "ON" It will turn on at 8 PM, but won't shut off at 10:05 PM. Do I put the button on "Timer" or "On"? You want to set the clock after ...

...time and the plugged the lamp into the timer. However the lamp came on, so will probably go off for the time I set it to come on. How do I get the lamp to be off now and come on when I pull the peg. ...