Husky Husqvarna Chain Saw 240E w 16in bar "drain fuel plug tank" Questions

Ad

Drain all fuel from the Saws fuel tank. -Remove and REPLACE with a NEW spark plug. -Remove and RELPACE with a NEW Air filter. -With spark plug and air filter removed and fuel drained pull the starting

Ad

Question about Garden

1 Answer

...drain the fuel out of the cylinder, giving it at least 10 minutes to drain. Now replace spark plug and follow starting procedures - you should have it running strong now!! If it refuses to start or ...

Ad

Question about Garden

1 Answer

...drain the fuel, and inspect the fuel tap by removing it from the tank if possible. Use compressed air to blow back into the fitting--something inside the tank may be plugging the fuel exit tube. Hope ...

Question about Garden

1 Answer

...drain the fuel tank and fill with fresh fuel, clean/replace the fuel filter in the tank on the end of the hose, remove the spark plug, rest on the side of the cylinder ( away from the plug hole ) ...

Question about Poulan Garden

1 Answer

...spark plug and check to see if you have a spark, if you have a spark and the plug is soaked in fuel, leave the plug out and let the machine dry out for a few hours and try re starting with no

Drain all fuel from the Saws fuel tank. -Remove and REPLACE with a NEW spark plug. -Remove and RELPACE with a NEW Air filter. -With spark plug and air filter removed and fuel drained pull the starting

Question about McCulloch Garden

2 Answers

Drain the fuel tank first, then the outer case must be removed from around the engine. This exposes the plastic tank. The loose fuel line is normally attached to the inside of the rubber plug which is

Drain all fuel from the Saws fuel tank. -Remove and REPLACE with a NEW spark plug. -Remove and RELPACE with a NEW Air filter. -With spark plug and air filter removed and fuel drained pull the starting

Question about Poulan Garden

1 Answer

...fuel in tank. Drain tank and back flush line, changing filter if there is one. Inject some compressed air into fuel line from carb.jet screw hole, thus blowing out line toward tank. May have to also ...

...fuel flow screw needs adjusted. You can check to see if the carb has gas by gently loosining the drain bolt on the bottom. Another option is removeing the air filter and dumping a small amount of gas ...

Not finding what you are looking for?
Husky Husqvarna Chain Saw 240E w 16in bar Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Top Husky Garden Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Vernon Taylor

Level 3 Expert

5951 Answers

john h

Level 3 Expert

22486 Answers

Are you a Husky Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...