...Chainsaw won't start. Has spark, has fuel, chain stop works and is in the right position for starting and on/off switch is in the on position It starts but won't stop when switched off by stop ...
...switch on my Husqvarna 41 chainsaw stopped working (didn't kill the running engine). Tired of pulling the choke, I replaced the switch, and in the process noticed a break in the two strand wiring ...
kill switch will not stop motor Check and make sure the wires are plugged into switch.If that don,t work it has a bad switch.
I have a McCulloch ES2200 Electric titanium chainsaw which is totally dead I have checked the fuse and still not working,any advise. Thanks I have read that the switch in these are bad!
chainsaw manual Cut out switch won't work What model Husqvarna chainsaw?
...working chainsaw and still got no spark new spark plug... checked filters all good... any ideas would be greatly appreciated thanks! you might have a broken wire to the spark plug. Use a meter to ...
Question about Garden
...chainsaw works well but ON/OFF switch does not switch saw OFF. How do I remove and check switch. Thanks george late model saw with red ON/OFF switch I am having a hard time finding the parts list or ...
kill switch doesn't work, how do i fix it? The switch connects directly to the coil body of the ignition module. You may have to remove the left side cover to expose the ignition module. The switch, ...
Question about McCulloch Garden
...switch on EM300s Electramac chainsaw broken and needs replacement This saw has been solid as a rock for years but "father-time" has taken its toll on the plastic housing of the trigger/switch. I ...
...chainsaw the stop button dosent work I cleaned the saw out but I still have to pull the spark plug to get the saw to turn off . Check to see if the ground to the switch is okay,if it is replace the ...
12 questions posted
Usually answered in minutes!
583 Questions
457 Questions
255 Questions