Question about Garden
...look under the mower where the shaft comes out to the blade. if there is oil there you have a bad crankshaft seal. it is easy to replace. the seal goes bad and leaks oil but there will be no
Question about Craftsman Garden
...oil only when running...help me please bought brand new last year.. you have to replace lower seal you have to take off blade the blade adapter then take a screw driver and slowly pry out old seal ...
Question about Troy Garden
...oil present, replace filter as needed. Clean air filter box with carb cleaner. Install new air filter reattach filter cover. Prime engine, pull starter rope 1/2 way 4 times to help prime, then pull ...
Question about Craftsman Garden
...seal the top plate of the breather. Either the rubber breather housing is cracked, or the cork gasket needs replaced. The other solution is to change the oil for a mineral oil not a synthetic ...
...oil no solution other than have the seal replaced its cheap part but the labour content makes it cost.however the cost of a damaged engine & shaft make the repair worthwhile. overfilling of oil ...
...bad seal it started did you turn the mower upside down then the oil filled up the oil filter take off the filter then it should start it has to breath it takes mor air then fuel to make a engine ...
oil leaks out of my lawn mower with briggs and Straton crank seal lower seal replace right away if less than one year old it is warranty one engine seal if not drain oil out the flip on side remove ...
...oil simply drains out and the lawnmower won't start could you tell me what might be the cause and if so how can I fix There is a crankshaft seal at the bottom of the case/crankshaft area that can ...
...you park it it leaves an oil spot under the mower, If this is the case you need to replace the bottom crankcase oil seal (the seal where the crank come out the bottom of the oil pan). Hope this ...
...oil seal 18 1/2 h. p. vertical shaft lawnmower engineleaks oil by pulley Remove the pulley and punch a hole in the seal with a nail or awl and screw in metal screw and pull out seal with a vise grips ...
175 questions posted
Usually answered in minutes!
370 Questions
122 Questions
62 Questions
64 Questions
42 Questions