...right signals together at the input side, and put the mix into a single channel of the amp, and then into the speaker from that one channel. The other option is to have 2 s115's - one on each
one channel don't work Onkyo 545 one channel don't work Use headphones or Computer Speakers and plug in to your headphones jack.If the audio is present on both channel , check your speaker
...channel and when to use a specific one.. Like theater ect.. And yes I know that one but so many things come out with the music way too loud do you have a center channel speaker hooked up? Most voices ...
Question about Denon Audio Players & Recorders
...headphones) but quality in one channel is shot to hell. Any ideas? check your speaker A - B channel push-button switchces. They tend to get worn and contacts internally corroded after all these ...
Question about Sherwood Audio Players & Recorders
...one channel does not work...I've tried speakers and headset, one channel silent on both... we've had lightening storms, I'm on a surge protector, is it a fuse or a button I need to push? Did problem ...
...one is for the center channel and a part number for it. I also read in a forum that my output transistors could be bad. There are 2 for each channel. Again, which ones are for the center channel and ...
...one good channel on the same board) you can use as a reference in checking part values. Moreover, you can pull the entire power amp assembly out of this receiver without too much trouble - it's a ...
Question about Pioneer Audio Players & Recorders
one pair of cables to the pre-amp output channels on the receiver and the other end of the cable to the left and right channel inputs on the equalizer. You will usually find these channels on the rear
channel problem Recently I've discover that the sound from one of the main speakers has too many static. I've the cords and also plugged the speaker to another channel to check if the problem was from
...one channel to one speaker and the other +/- terminals to the other speaker, you will instead use the plus (+) terminal from one channel and the minus (-) terminal from the other channel to drive one ...
167 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
85 Questions
76 Questions