Onkyo TX-DS696 Receiver "subwoofer connections line level rca" Questions

...line level RCA jacks, the subwoofer produces a loud buzz/hum. I have tried connecting it to the subwoofer out jacks on three different receivers, and a DVD player (with 7.1 analog outputs) with the ...

...subwoofer is active, it does not support line level (RCA) signals. Just connect the subwoofer as you would a pair of speakers. Once connected, you make sure the front panel speaker switch on the Sony ...

...subwoofer function in the old and new receivers: RCA connections are for Line Level signal between components only. The input (bare wire) at the speaker is for AMPLIFIED signal. You can't just modify ...

...line level sub woofer out. What is then required is an active subwoofer or an additional mono amp for the subwoofer speaker. The receiver will then be connected through an RCA to RCA cable and the ...

...subwoofer to the suround jacks? Your receiver should have an RCA connector on the back panel that will be marked "sub woofer" or "LFE out". That connects to your sub woofer with a standard RCA type ...

...subwoofer green? Mine comes on with the reciever. Good luck! You do need the powered sub. RCA out means its a line level out which has no power to power the sub. Buy a sub with a built in amp and rca ...

In? etc. Thank you The 667 has two line level outputs to feed a subwoofer. They are identical. You only need one for most sub woofers. You need a suitable length pin audio (RCA) audio cable to connect

...subwoofer is also new and in working order. HELP please. Thanks RCA cable. It's called RCA when carrying Line Level audio; Coaxial when carrying digital data. Does the sub work when you run speaker ...

...LINE OUT might be turned off or Subwoofer volume set to low or off... (-db level) kinda thing...speaker wires are usually always live etc... You may have to go into the speaker setup menu and choose ...

...subwoofer' line out so you will be feeding all frequencies to the sub. (Not ideal, but usable.) Use one of the 'tape out' plugs on your receiver for a line level output. Use a RCA splitter to go from ...