Onkyo TX-SR601 Receiver "replace fuse" Questions

...can an do burn out. Use ohm meter to test if fuse is good. The fuses are usually just like automotive fuses so you can try to find an amperage printed or stamped on the fuse. Replace with same.

replace fuses properly? i bought fast acting replacement fuse and sparked a light 2 seconds after powering up. why?/fast acting fuse? Or? If you put the new fuse in the same way/place the old one was,

...replace both transistor. Buy a slow blow fuse from Radio Shack Removed Transistors, replaced fuses turned on power, fuses stayed intact but then F901 blew instantly. Same type of fuse 8 amp 125V on ...

...replace more than a fuse and probably a diode and a conductor which supply power to the fuse as they might have lost the ability to step down the power which flows to the fuse. Check the components ...

replace the fuse Unplug the unit. Carefully unscrew the screws for the case. Probably 4 screws, 2 on each side of the unit. Remove the cover. Look for the fuses, and replace with exact same type/specs

replace fuse there are too types of fuses used today there are glass and thermit if its glass then simply remove the cover of the amp find the fuse and replace with new one if you look around and cant

...replace the fuse and it blows again, you've got a much bigger, more expensive  problem. Be prepared to pay as much or more to a repair shop than the unit is worth. Be prepared to have a ...

...I replaced the 1.25 fuse, plugged it in and it blew the replacement fuse. This unit has sentimental value and I do not want to replace it or get rid of it. This must be caused by faulty audio. ...

...the first fuse on the right looking from the front of the unit. I removed the 10 years of dust and replaced the fuse. After closing up the unit the fuse blew again. What is causing the fuse to blow? ...

...replace a fuse on CDJ 200 Hi diamonddan11 I have given you direct instructions as to where the fuse is on your original post. The fuse is located inside the unit on the same printed circuit board as ...