Question about Sony Audio Players & Recorders
PROTECTED MODE CAN YOU HELP ME UN PROTECTED Amp output is damaged and needs repaired. Protect mode cannot be deactivated. When amp is repaired and operating normally protect mode will not be displayed
...Protect mode. Like a ground problem maybe. Any suggestions? There are bad connections on the main board that are effected by heat. I would suspect that when the volume level is higher, the system ...
Question about Optimus Audio Players & Recorders
...completely and if the protection mode remains, then the problem is internal to the unit and is likely to be shorted output transistors. Expect a parts cost in the $20-$50 range for this repair. ...
...Protect, then there is a real fault. In that case the unit may be disassembled and tested to find the fault. If that is the case I suggest contacting the manufacturer at the number listed on the ...
...mode other than taking it to a repair shop? you have to verify your connection cause if you are a short circuit in your different output or input the protection mode is on. it's an internal security ...
PROTECT display indicates that receiver got serious problem in output amplifier section and protection mode is activated to avoid further damage. Output amplifier section should be tested by qualified
Protect Mode My receiver has gone into protect mode....just wondering how i can get it back to working order, have disconnected everything from it and even plugged it into a different power point but ...
Question about Onkyo Audio Players & Recorders
...unit will go in to protect mode to prevent damage to the speakers and the rest of the unit. I would take the unit in to a local repair shop and get a estimate of repair charges. Hope this
protect mode constant Protect mode will not clear by any method advertised. Can this be repaired at home? doubtful, protect on a sony receiver usually means there is a short in the amp section
Question about Sony Audio Players & Recorders
...are unhooked how do I get it out of protection mode? if you disconnected everything and it still goes into protect, the most likely there is a damaged amp channel that will need to be
34 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions
