cable by tightening down the terminal's bushing. Ensure bare wire from the speaker cables does not touch the back panel or another socket. Ensure that there is only 1/2" (1cm) of bare cable or pin
...receiver, you'll need audio cables with RCA plugs from the sources to the amp, and regular speaker cable (18-gauge, and don't waste your money on "Monster Cable"!!) from the amp to the
have 4 total and 2 are not working. check speaker cable for open circuit cable-repeat your setup again and confirm all speaker are in on status-last thing defective speaker itself.(sure you replace it
Question about JBL Audio Players & Recorders
...right speaker is working and i found recently the left speaker is not functioning so could you please tell me what should i do check your cable speaker to the left speaker, maybe the cable ...
...speaker cable required. where and what price? need replacement speaker cable for 2.1home theatre system . ht-100w. unit to sub woofer. thank you. [email protected] buy new speaker cable for home ...
cable, and then connect celestion speakers to the Speaker Outputs on the S10? There are 4 speaker outputs (left,right, + and -) and I when I try and screw the speaker wires into these outputs there is
speaker cable my polkaudio speakers have four outputs at the back and my onkyo amp has two inputs, I have RT10 polkaudio speakers (complete 5.1) system with a onkyo amp XT-SR804E. What is the best way
...of it. Check R cable from source to speaker, No power used in L or R cable, they only receive the signal from SOURCE to speaker, You onlly have 2 ends of each cable, 1 to source other end to ...
30 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions