Question about Sewing Machines
...basting stitch What is the stitch length for a basting stitch? Basting a Seam for Fitting: At the sewing machine, set the stitch length to 5mm. This will make it easy to remove any unwanted stitches. ...
...basting stitch the information should be in the sewing machine manual, if you don't have a manual, add a comment with the name and model number of the machine and someone should be able to help you ...
Question about Kenmore Sewing Machines
...If so, how? A baste stitch is basically setting the machine to a straight stitch with the longest stitch length available. Loosen the top tension slightly if you want to remove the basting
Question about Elna Sewing Machines
...basting" stitch selection, you make your own basting stitch by: * Setting the stitch length to the maximum * Loosen the upper tension so the bobbin thread lies flat under the fabric Then to gather or ...
Question about PfaFF Sewing Machines
...basting stitch length? when I try, it just beeps at me. Expression 2.0 A BASTING STITCH IS ONLY A LONG STRAIGHT STITCH. THE NUMBER THAT IS LOWER IS A LONGER STITCH (FEWER STITCHES PER INCH). YOU WERE ...
...basting stitch on my ex660 i have looked over the manual, and cannot find how to do it! any ideas?! The basting stitch is not normally a separate stitch, just set the stitch length as long as it will ...
...basting stitch for machine embroidery? Some machines have a built-in basting stitch. If yours doesn't have it, the closest you can get is setting the stitch length to as long as possible. To make the ...
...basting stitch I can. I am having trouble figuring out how to set the machine. Thanks. I haven't been able to find a 6003 manual or a good image of the stitch range for this machine on line. ...
Question about Bernina Sewing Machines
...basting stitch. It is rather difficult to explain so that would be the best source. (You will need a Yahoo email account to join the group.) A Bernina technician can release that for you. Bernina ...
basting stitch programmed in, it may have a symbol like a dot then a long dash then another dot. This will give you a decent spaced basting stitch. On mechanical machines sometimes you can
68 questions posted
Usually answered in minutes!
49 Questions
25 Questions
19 Questions
8 Questions
8 Questions