set the stitch length from a Straight Stitch setting to a Straight STRETCH Stitch setting, there isn't any difference. I have the length at 2 which is always beside S.S. which means this is always set
...set for straight stitch, there is a "peak" stitch about every 6-8 stitches Check your stitch pattern because you most likely have machine set to perform a blind stitch. chane your pattern ...
stitch is "width" set to zero and "length" set to 2.5. If the machine has several different stitches then there may be a "stitch selector" too where you can choose the stitch style, ie zig-zag, 3 step
...stitch. (usually you will set this from 1.5 to 2.5) #4- Stitch selector, match up the number with the stitch you want to sew. If you want to use the lower row of stitches (14-25) set the length dial ...
Question about Sewing Machines
set to 0). Stitch maybe 4 or 5 stitches. Then move needle all the way to the left, set stitch length to very short (maybe somewhere between 0 & 1), width to slightly less than half, stitch forward
...stitch selector set on straight stitch, or on a stitch with a width component, like a blind hem stitch? Some machines consider straight stitch to be a zigzag stitch of width=0, while others have ...
t move kenmore 12102 Make sure the stitch is set to a sewing stitch, (not a buttonhole stitch). Set the stitch length dial to a longer stitch. Make sure you have you feed dogs set to the "up" position
...stitching with width at zero. How canI get a straight stitch Shark 384 Set it zigzag mode and set the stitch width dial (lower dial on right side) to zero. That should give you straight
Question about Simplicity Sewing Machines
stitch length setting is not set to zero or a very small number. If it is, the machine will only sew straight stitches. Stitch selector mechanism: It's possible that there is a problem with the stitch
35 questions posted
Usually answered in minutes!
49 Questions
48 Questions
19 Questions
8 Questions
8 Questions