Husqvarna Interlude 445 Sewing Machine "remove bobbin winding" Questions

...or the start/stop button to start winding the bobbin. When the bobbin is full, the bobbin winding will slow down and stop automatically. The pop-up closes. Remove the bobbin and cut the thread

...bobbin winding area. I thought I could remove the screws and remove that plate and get all that thread out. It did not work. The plate still does not come off and the screw that holds the bobbin ...

...remove bobbin from bobbin threader till almost all thread removed. Viking 1+ Fills the bobbin fine but then can't pull the bobbin off until I start removing the thread from the bobbin and finally it ...

...remove the bobbin from the bobbin winder by pushing the latter to the left. Just fixed my moms. Take the top cover off, remove the arm, careful of the tension spring. clean the shaft hub. spin till ...

...right until you hear a click. Hold the end of the thread and press down on the foot pedal to begin winding the bobbin. Once the bobbin is full, cut the thread and remove the bobbin from the

...bobbin. Make sure it stops, then remove it. If the problem continues, take it to an authorized Husqvarna Viking dealer. They should still be able to take a look at it. Check Husqvarna Viking website ...

bobbin winding routine. I suspect that you failed to move the bobbin winding mechanism back into the sewing position. Look closely at the area around the bobbin winding spindle. It looks like there is

...remove the bobbin from the spindle. Cut the thread to separate the bobbin thread from the needle thread. Move the bobbin spindle up. Sewingpartsonline.com has a link to the manual for the Husqvarna ...

...remove it simply take the thread off the bobbin and it will come off very easily. When you wind a bobbin on a Husqvarna and you leave the machine threaded to wind the bobbin through the needle, you ...

Bobbin not not threading, what's the problem? Thread will not thread onto bobbin, We don't know the make & model of your machine. Are you trying to wind the thread onto the bobbin? FWIW, for ~$30 ...