Brother PE770 Computerized Sewing Machine "needle jammed" Questions

Needle jams and breaks off When I attempt to sew, my needle jams after the 3rd or 4th stitch. When I manually rotate the wheel to loosen it and proceed again, the needle breaks off. I have a Singer ...

...jammed a needle and something happen to the bobbin winder. The round thing on the side(???) won't work(so the needle willn't go upa When the neddle jammed there was a loud jamming sound. ...

...when fabric jammed while sewing. After jam was cleared needle hits plastic every time. Perhaps you have bent the needle. Or perhaps you have shifted the bobbin somewhat while removing jammed

...sew fleece and the machine started jamming and I cleaned out the bobbin casing and also changed the needle and it still jams. correct needle insertion is mandatory for the proper use of the sewing ...

...jammed in the bobbin area. It will only stitch one stitch and then jams. I have taken it apart over 30 times, and can't see anything wrong. How do I get the thread to stop jamming? have you tried ...

My sewing machine needle (very new one) keeps jamming every couple of turns of the needle - and the thread is very loose and loopy on the fabric. It makes a jarring noise Rethreading, changing needle ...

...a metal noise followed by jaming noise Sounds very like a bent needle or jammed bobbin case. have you cleared any broken threads or replaced needle? Lift the needle plate and check under that

...and pick up the bobbin.mits jammed. I retreaded the needle and replaced the bobbin thread, but still jammed. Try installing a brand new needle. Use a different brand of thread. All About Needles

...jammed threads and waited days now and still does the same. Just sewing on normal fine cotton Is your needle blunt? Is the thread the same in bobbin and needle? is the tension and needle size correct ...

...needle jammed while in the fabric. The needle bar can be rocked back and forth by half a millimeter but can't be moved up and down. Finally got bobbin and needle out, but still can't ...